Your cart: Items:, Value:

FPV Equipment

buy online | FPV-OSD-Camera Mounts |  FPV Equipment

FieldView 1212 12.1inch FPV HD LCD Monitor With Sun Shield And Tripod Mount

FieldView 1212 12.1inch FPV HD LCD Monitor With Sun Shield And Tripod Mount


Price: 141.30

Quantity:

Who needs goggles when you have 12inches…………of FPV monitor! This is the ultimate for those who prefer a screen over goggles. The New FieldView 1212 is not just some random off the shelf monitor, it has been optimized for FPV use with features such as a non-blue screen if the input signal gets weak, a wide range of input voltages, an integrated 2 axis tripod mount and of course a removable sun shield for those sunny days. FieldView monitors have set a high standard in the FPV community and the new 1212 is no exemption.
Specifications:
• Image: 12.1" TFT LCD LED
• Resolution: 800x600
• Input resolution up to 1920x1440
• Horizontal frequency range: 30-60KHz
• Field frequency range: 60-75Hz
• Pixel Size: 0.2175(H)x0.2175(V)m
• Display Ratio: 4:3
• Brightness: 330cd/m²
• Viewing Angle: 70°/70°(L/R) 50°/70°U/D
• Contrast Ratio: 900:1
• Response time: 30ms
• Input Voltage: DC6-24V
• Power Consumption: 8W
• Input Signal: VGA,AV1,AV2,Audio,DVI,HDMI
• NTSC/PAL Manually Selectable in Menu
• Working Temperature: -10~50c
• Storage Temperature: -20~60c
• Size: 298L×245W×45Dmm
• Weight: 1130g without cables or sun shield, 1330g with cables and sun shield
• Mounting: Standard 1/4-20 tripod and VESA mounts
Includes:
12.1" LCD Monitor
Sun Shield with Velcro Strips
12V 1200mA power supply with US prongs, accepts 100-240V, 50/60Hz
A/V Cable with 1 Composite Input, 1 Audio Input (mono), 1 Power input (2.1mm barrel)
Manual Will Fit on Tripod with rear mount click here

Fieldview 888 TFT LCD 8

Fieldview 888 TFT LCD 8" HD FPV Monitor with Backligh


Price: 97.00

Quantity:

The Fieldview 888 monitor is the perfect partner for FPV users or any other form of videography. It is great for outdoors as it has a very bright image and LED backlit screen which is fully adjustable and the monitor is supplied with its own foldable screen shroud for optimal viewing.
One of the most important features of this monitor for FPV users is that if the signal gets weak it does not switch to the "blue screen". This allows you to fly much further without losing the image, when there is no video input the monitor just shows static, it never turns blue.

Features:
• 8.0 inch HD Display with 450cd/m Brightness
• Ideal for use with FPV
• No "Blue Screen" due to weak signal input
• 800 x 480 Resolution Display
• LED Backlight
• 16:9 Display Ratio
• 500:1 Contrast Ratio
• Supports video formats: NTSC M, PAL M, NTSC BG, PAL N,
NTSC DK, PAL DK, PAL 1, SECAM BG
• Anti-Glare Surface Treatment
• Foldable Screen Shroud for outdoor use

Specifications:
Dimensions: 208 x 145 x 33mm
Brightness: 450cd/m²
Resolution: 800 x 480 pixels
Display Ratio: 16:9
Backlight: LED
Viewing Angle: 70°/ 70° (L/R) 50°/ 70° (U/D)
Input Voltage: DC 6 ~ 18V
Input Signal: Video, Audio
Power Consumption: 6W
Working Temperature: -20°C ~ 60°C
Storage Temperature: -30°C ~ 70°C
Weight: 520g
Installation: 1/4"- 20 thread and VESA mounting socket (75mm)
Speaker: Built in, 1 Watt
Certificate: CE, FCC, Rohs


Included in box:
8.0 inch HD Monitor
Outdoor Screen Shroud
DC 12V Power Supply
User manual Alternative-image click here

Boscam 5.8GHz Diversity Receiver 7.0 Inch TFT LCD Monitor for FPV 800x480 LED Backlight

Boscam 5.8GHz Diversity Receiver 7.0 Inch TFT LCD Monitor for FPV 800x480 LED Backlight


Price: 149.00

Quantity:

This 5.8GHz Diversity LCD Screen offers the perfect solution for any 5.8GHz FPV system. It features its own in-built 2CH 5.8GHz A/V receiver, allowing it to receive directly from your FPV model's A/V transmitter! This means it can eliminate the need for expensive FPV goggles, or can be used simply as a way to display your FPV model's video for others to view as you fly.

Featuring dual A/V outputs, this monitor is capable of outputting the signal of both RF channels at the same time. It also features an A/V input as well as a Tracker Link port.

Offering true 5.8GHz diversity, this device features automatic antenna switching to provide the best reception possible. A foldable screen shroud is included to optimize viewing in bright conditions.

Features:
• 800 x 480 High Resolution TFT LCD Screen
• In-built 5.8GHz Dual Switching Receiver
• Dual Buffered A/V Outputs
• Capable of Receiving 2 Different Channels Simultaneously
• Not Affected by 2.4GHz R/C Transmitter Signals
• Lightweight and Durable
• 9 Language Menu Selection

Working Frequencies:
CH1: 5705MHz
CH2: 5685MHz
CH3: 5665MHz
CH4: 5645MHz
CH5: 5885MHz
CH6: 5905MHz
CH7: 5925MHz
CH8: 5945MHz

Specs:
Screen Size: 7.0 inch
Screen Type: TFT LCD
Backlight Type: LED
Resolution: 800 x 480
Brightness: 450cd/m²
Contrast: 500:1
View Angle: 140/120° (Horizontal/Vertical)
Working Voltage: DC 7~12V or 11.1V lipoly battery
Working Temperature: -10°C ~ +65°C
Power Consumption: < 8W
Size: 180 x 120 x 23mm
Antenna connection: SMA

Included in box:
7.0 inch 5.8GHz Diversity TFT LCD monitor
Outdoor screen shroud
JST power plug adapter lead
A/V cables More...images click here

Boscam RC800 DVR 5.8Ghz 32CH Receiver 7inch Monitor With DVR Recorde

Boscam RC800 DVR 5.8Ghz 32CH Receiver 7inch Monitor With DVR Recorde


Price: 137.00

Quantity:

The Boscam RC800 DVR 7 inch FPV monitor is truly an all in one FPV monitor. The RC800 has a built in high sensitivity 32ch 5.8GHz receiver and integrated DVR to record your epic fpv flying.
The RC800 also has a built in OSD that displays the channel unlike other monitors that are dip switch settable. The built in OSD also displays battery voltage, record time and memory usage, along with other useful information.
Boscam’s RC800 has an integrated AAT port for antenna tracking systems and a data out that allows for synchronized channel switching in flight with your RC transmitter. The built in DVR records to a standard SD card in MP4 format for maximum compatibility in pristine original quality.
The RC800 With one of the brightest non-glare and non-blue screen screens on the market, built in audio, 32channel receiver, DVR, and AAT/data outputs…makes this hands down the best value in FPV monitors.
Features:
• Built in DVR
• Built in 32 channel 5.8GHz high sensitivity receiver
• Loop Record
• Date and time Stamp
• OSD with Memory Info, Format, voltage etc.
• Multi language support: English, Chinese, German, French
• TV PAL/NTSC Standards
• Auto Power Off
• Low voltage warning with Battery Type and cell count support
• 5 levels of LCD Brightness
• Supports 16:9 and 4:3 Screen sizes
• AAT output for antenna tracking systems
• Data out for synchronized RC channel switching
Specifications:
Size: PAL(720×576)?NTSC(720×480)
Formate:MP4, mono audio channel
Storage: SD Card (support 32GB in max)
Wireless receiver:5.8GHz 32CH sensitivity -90dBm
LCD: 7 inch 800x480 HD Screen
AV output: mono audio channel, video output
AV input: mono audio channel, video input
DC IN: 7-28V
AAT: OUT port
ANT: RPSMA
DATA: OUT port
USB: USB2.0
Includes:
7 inch Monitor x1
Light Shield x1
USB Cable x1
AV Cable x1
DC Cable x1
AAT Connection Cable x1
Data Connection Cable x1 more detailed image of product

Boscam 5.8g 600mw 32CH FPV Wirless AV Tx & Rx Set TS832 and RC832

Boscam 5.8g 600mw 32CH FPV Wirless AV Tx & Rx Set TS832 and RC832


Price: 93.00

Quantity:

Boscam has forged a reputation of quality and reliability and has been tested and developed by FPV pilots for FPV pilots.

The TS832 Transmitter packs a whopping 600mW of ultra clean 5.8GHz power! A must for those looking for longer range and locked in video. The TS832 is transmitting a full range of 32 channels and uses an easy to use 2 button interface, it also comes with a clean pre-wired harness, and only weighs in at a scant 21g, it’s Perfect for a wide range of aircraft!

The RC832 Receiver is nice and small in size for easy integration into your ground station, but big in quality and features. The receiver uses the same two button interface as the TS832 Transmitter making channel swapping a breeze. There are two independent AV outputs for both audio and video. So you can use a monitor and set of goggles or maybe a DVR to record your flight, for when your significant other asks where you were for the last 4 hours. Powering the receiver at the field is as easy as plugging in a 3 cell lipoly into the included prewired cable with mini JST. It just doesn’t get any simpler than this.

*For best range and video link stability we recommend using the Boscam 5.8GHz Cloud Spirit circular-polarized Antenna Set (SMA-RP) available below in the accessory’s tab

Features:
• 32 channels: Cover A, B, E bands and F bands
• Two switching buttons for the band and channel
• Two digits display for the band and channel
• Power off memory for last channel and band
• dual Independent video and audio signal outputs

Specs:
Video format supported: NTSC/PAL
Antenna connection: RP-SMA, jack (module side, both TX and RX)

Transmitter TX TS832 specs:
Power input: 7.4-16V (3S Lipoly suggested)
Transmitting power: 600mW
Antenna gain: 2dbm
Working current: 220mA at 12V
Video bandwidth: 8Mhz
Audio bandwidth : 6.5Mhz
Weight: 21g
Dimension: 54x 32x 10mm(excluding antenna)

Receiver RX RC832 specs:
Power input: 12V
Working current: 200mA max
Antenna impedance: 50O
Antenna gain: 2db
Rx sensitivity -90dBm
Video impedance: 75O
Video format: NTSC/PAL auto
Dimension: 80x 65 x15mm
Weight: 85g

Frequency range:
FR1 5865,5845,5825,5805,5785,5765,5745,5725
FR2 5733,5752,5771,5790,5809,5828,5847,5866
FR3 5707,5685,5665,5645,5885,5905,5925,5945
FR4 5740,5760,5780,5800,5820,5840,5860,5880 More details of the package images click here

Quanum 2.4Ghz Telemetry System (Volt/Amp/Temp/mAh) V2

Quanum 2.4Ghz Telemetry System (Volt/Amp/Temp/mAh) V2


Price: 79.99

Quantity:

The Quanum telemetry system gives real-time and accurate voltage, current, mAh and temperature display plus low voltage warnings via a robust 2.4Ghz DSSS connection.
The receiver pannel is a large 132x64 LCD and attaches directly to your existing radios antenna for convenient at-a-glance in-flight status checks.
The Quanum Telemetry system will also warn you when your battery pack is approaching 3.2v per cell with a variable audio tone. No more deadstick landings!
And because its 2.4Ghz DSSS it wont interfere with your existing system, no matter what channel youre on!
The Quanum Telemetry system transmits a narrow, lightweight signal 4 times a second and uses DSSS technology to ensure no conflicts with other systems close by. Included is an inbuilt 450mAh Li-ion power source and a convenient in-car and PC USB charge jack!
Specification;
Tx Weight: 16g
Tx Size: 50x17.5mm
Tx Output: 20dBm <100mW 2.4Ghz DSSS
FCC ID: XR9V003

Included;
Large high contrast 132x64 pixel LCD 2.4Ghz Receiver. (V2)
1km Range 1~6S Transmitter (V2)
Receiver mount (universal type)
Cigarette lighter 5v out USB charger
USB cable. (Charge in car or on a PC)
CE, FCC, RoHS
Note: Current/temp sensor sold separately. More...Information click here

Quanum 2.4Ghz Telemetry System Temp/Amp add-on

Quanum 2.4Ghz Telemetry System Temp/Amp add-on


Price: 22.00

Quantity:

Quanum 2.4Ghz voltage telemetry transmitter Current & Heat Sensor

Spec.
Direct DC Only.
Current Sensor: 100A Max
Temp Measurement: -20~80Deg C

To be used with Quanum transmitter V2 module. More Images of Quanum Cl;ick here

Boscam 5.8Ghz 200mw FPV Wireless AV Tx & Rx Set

Boscam 5.8Ghz 200mw FPV Wireless AV Tx & Rx Set


Price: 62.00

Quantity:

5.8Ghz 200mW transmitter. This system is Good for up to 500m flying with the supplied antenna. An optional directional antenna can extend range to 1km+. This unit a Includes built-in microphone. The receiver unit has additional AV outputs for video recording while using FPV goggles.

Specifications:
Output impedance: 50Ohm
Output power: 21~23dBm
Channels: 8
Transmitter operating voltage: 7~15VDC / 150mA
Receiver operating voltage: 5VDC
Operating temp: -10~85C
Video bandwidth: 0~8.0MHz
Audio frequency: 6.5MHz
Video input level: 0.8~1.2Vp-p
Video input impedance: 75Ohm
Audio input level: 0.5~2.0Vp-p
Audio input impedance: 10K/Ohm
Weight: 25g
Antenna connector: RP-SMA
Dimensions: 55x26x17mm

Channels
5.8G : 5705,5865,5665,5645,5885,5905,5925,5945MHZ Click to see cable set

1/3-inch SONY CCD Video Camera (PAL)

1/3-inch SONY CCD Video Camera (PAL)


Price: 19.00

Quantity:

The camera uses a quality glass lensed SONY CCD system.

Included.
1 x SONY CCD 1/3inch Camera

Camera spec.
CCD sensor type:1/3 color SONY CCD
Pixel;
NTSC: 510(H)*492(V)
PAL: 500(H)*582(V) (Included)
Scanning system: Interlaced scanning
Synchronization: System:Inter
Horizontal resolution: 420TV line
Minimum Illumination 0.01LUX/F1.2
DSP+CCD: CXD3142R+405AK
S/N Ratio: 48dB
Gamma Modification: 0.45
White balance: Auto
Auto backlight compensation: Auto
Lens: 3.6MM
Audio: No
Input voltage: 9~12.6V
Electric current 80MA
Electronic Shutter: 1/50 (60) ~ 1/100,000s
Video output: 1.0VP-P composite video
Operation Temp.: -20~50
Size: 38*38mm
Flight time: Approx 60min/100mah 3S

2 x 9G Servos for Camera Stand

2 x 9G Servos for Camera Stand


Price: 9.98

Quantity:

2 x 9G Servos in pack ith Futaba / JR compatable plugs
Plastic gears

Eagle Tree Logger V4 Deans Version

Eagle Tree Logger V4 Deans Version


Price: 62.00

Quantity:

eLoggerTM V4 - the Easiest Way to Monitor your Power System!

New! Whether you’re into Electric Planes, Helis, Cars, Boats or other models, you need to know how your electric power system performs under actual operating conditions. The eLogger is the product you need to monitor your LiPo, A123 or any other electric power system.

Here are the key features of the eLogger V4:

Logs pack current to +/- 100 amps (150 amps with MPRV4-LEADS-150) and voltage from about 5 volts to 80 volts
Current is measured with a true Hall Effects Sensor - NOT a power robbing resistance shunt
Adjustable logging rate (from 50 samples per second to one sample every 5 minutes)
16 times the logging space of the standard eLogger V3, and lossless data compression. Typically logs all available sensors for about four hours, at 10Hz.
All data logged to permanent memory, which retains the data even when the power is removed
Fully compatible with our OSD Pro expander
Includes Y cable for throttle position logging
Great for bench monitoring of battery charging also!
Supports the PowerPanel LCD Display
Accepts optional inexpensive sensors for three Temperatures, RPM (brushless, magnetic or optical), Airspeed, Altitude, GPS, Servo Current, and more
Software computes Wattage, mAH, etc. for complete e-flight data.
Fully Compatible with Windows 7 (32 and 64 bit), Vista, 98SE, ME, Win2K and XP™
Weighs about 0.8 oz (22 grams). Versions with Wire Leads may weigh slightly more.
Comes with our state of the art Windows virtual playback display and graphing software
Powerful Graphing software has advanced charting features, such as amps vs volts
Internet Updatable firmware - as we add new features or (heaven forbid) have a firmware bug, the update is just a download away! No need to ship hardware back and forth.
Full support for English and Metric units.
Software has built in English, German and Chinese language. overview page click here

GPS Expander for R/C V4 DataRecorder

GPS Expander for R/C V4 DataRecorder


Price: 76.91

Quantity:

New GPS Expander Module based on the latest GPS technology. Built-in LED which indicates 3D fix. Fast 10Hz update rate. Built-in battery backup for quick fixes.
Plugs into the eLogger V4 to provide live and/or recorded lat/lon, ground speed, GPS altitude, distance to pilot, course, UTC timestamp, and more. Integrated display/3D graphing software included in data system. WAAS and EGNOS compatible, built-in patch antenna.
NOTE: if you plan to use the GPS with your eLogger with 8S (approximately 30V) packs or higher, the Battery Backup Harness (CAB-BAT-BACK) is required.

3S Battery Monitor for 11.1V Battery

3S Battery Monitor for 11.1V Battery


Price: 2.99

Quantity:

Great for checking Battery condition has light and alarm fitted
This unit will give a warning buzzer when the Lipoly pack drops below 9v.

4S Battery Monitor for 11.1V Battery

4S Battery Monitor for 11.1V Battery


Price: 2.99

Quantity:

Great for checking Battery condition has light and alarm fitted
This unit will give a warning buzzer when the Lipoly pack drops below 9v.

5S Battery Monitor for 11.1V Battery

5S Battery Monitor for 11.1V Battery


Price: 2.99

Quantity:

Great for checking Battery condition has light and alarm fitted
This unit will give a warning buzzer when the Lipoly pack drops below 9v.

6S Battery Monitor for 11.1V Battery

6S Battery Monitor for 11.1V Battery


Price: 2.99

Quantity:

Great for checking Battery condition has light and alarm fitted
This unit will give a warning buzzer when the Lipoly pack drops below 9v.

TURNIGY Multi-F DC Watt Meter 75A LOWER PRICED

TURNIGY Multi-F DC Watt Meter 75A LOWER PRICED


Price: 12.99

Quantity:

TURNIGY Multi-F DC Watt Meter 75AA geat way to measure your motor or battery performance! Use it to control your ESC while you measure total power usage. A great addition to any testing station!

Spec.
Input Range: 3.3 ~ 50v
Output: 0~70A
Pulse Width: 20ms: .9-2.1ms(high side) / 1-2ms(low side)

buy online | FPV-OSD-Camera Mounts |  FPV Equipment